High Speed with Signal Integrity eBook

IMS CONNECTOR SYSTEMS

INTERSTATE CONNECTING COMPONENTS

Amphenol SV Microwave offers millimeter wave connectors and coaxial cable assemblies for 5G mobile communication development and production. Extreme frequency push- on and threaded RF connectors offer industry-leading signal fidelity in the 5G frequency spectrum and unique packaging designs for high-density requirements.

The compact and robust HTP Series offers high-speed data transmission (up to 20 Gb/s) and enables fast data communications for high bandwidth applications. Designed for twisted pair cabling, reducing weight, this Ethernet connector solution operates at high bandwidth across multiple hardware and software components.

The MCA Series features high-speed data transmission (up to 20 Gb/s) and frequency range (up to 15 Ghz). MCA is compliant with the new mini-FAKRA interface from VW. It features scalable multi-pole connections. Hybrid RF and LF signal combinations are possible, with optimized footprints, and SMT options available.

MOUSER

I-PEX

CABLINE-CA II horizontal mating type micro-coaxial connector, 0.4 mm pitch, is ZenShield® fully-shielded with multi- point grounds to prevent EMI leakage. The mechanical locking cover prevents incomplete mating and back-out/un- mating. High-data-rate transfer (20 Gb/s/lane) is ideal for Thunderbolt™ 3 applications.

CABLINE-VS II horizontal mating type micro-coaxial connector, 0.5 mm pitch, is ZenShield® fully shielded with multi- point grounds to prevent EMI leakage. The mechanical locking cover prevents incomplete mating and back-out/un- mating. High-data-rate transfer (20 Gb/s/lane) is ideal for Thunderbolt™ 3 applications.

Amphenol FCI Double Density Cool Edge 0.80 mm Connectors feature a compact design with two rows of contacts and differential, single- ended, and power pin options. These connectors can accommodate both high and low speed signal and power.

MOUSER

NICOMATIC

OMNETICS

Amphenol FCI Cool Edge Connectors support board-to-board (BTB) applications in the electronics market. This high-speed and high-power card edge connector system addresses multiple standards such as PCIe, SAS, SATA, Gen 4/5, OCP 3.0, EDSFF, NGSFF/ NF1, and Gen Z.

The 1.27mm pitch EMM series is 20% smaller than standard Micro-D connectors; provides extreme modularity with any pin selection from 4 to 60 signal contacts; meets the performance requirements of MIL 83513; and features reversed contacts, integrated 90° back protection, and interchangeable hardware.

Nano 360 USB 3.0 connectors provide reliability and ruggedness with the signal requirements of USB 3.0. Using both simulation and measurement, performance is maximized for USB by optimizing the pin locations of the critical signals for data transmission. Excellent crosstalk meets USB 3.0/USB 3.1 Gen 1 requirements.